1 安裝使用指南
1.1 概述
ARTM 系列溫度巡檢測控儀適用于一路或多路溫度的測量和控制,主要應用于火電廠、水電站等場合的溫度
巡檢測量及控制。
1.2 型號及功能


1.3 安裝尺寸:
1.4 包裝
包裝內含下列項目:
Packaging contains the following items:
主機(含插拔式端子排,銘牌,安裝支架等);
Main engine (including plug-in terminal, nameplate, mounting bracket, etc.)
產品安裝使用手冊。’
Product installation manual.
在打開產品包裝時,請仔細檢查是否有損壞,如有任何損壞,請及時通知 ACREL 公司或代理商,并請保留
損壞的外包裝。如系 ACREL 公司或代理商責任,將及時予以更換。
安裝方法
1.5.2 Installation
在您的配電盤上,選擇合適的地方開一個與所安裝溫度巡檢儀開孔尺寸相同的安裝孔。
On your switchboard, select the appropriate place to open a hole with the same size as the installed temperature
inspector.
取出溫度巡檢儀,松開定位螺釘(逆時針),取下安裝支架。
Remove the temperature inspector, loosen the positioning screw (counterclockwise) and remove the mounting
bracket.
把儀表插入配電盤儀表孔中。
Insert the meter into the dial gauge hole.
插入儀表后裝上安裝支架、定位螺釘(順時針)。
Insert mounting bracket and positioning screw (clockwise) after instrumentation.