MC-TAMR04 51305907-175變頻器觸發板

MC-TAMR04 51305907-175變頻器觸發板

                                              產品詳情資料：

要自動配置5136-PFB-VME DP主機：

1.運行VME Network Configuration（VME網絡配置）程序（5136-PFB-32/Configuration Tools/PFB Network Configuration），并從Open card（打開卡）對話框中選擇要使用的VME卡。

2.設置電臺地址、波特率并檢查***的電臺選項。

3.單擊“確定"關閉程序

4.運行VME命令實用程序（5136-PFB-32/Configuration Tools/

VME命令），然后再次選擇您在步驟1到3中使用的VME卡。

5.從下拉菜單中選擇auto_dp_config選項，然后單擊Execute。SST ProfiBus卡聯機并搜索可配置的DP從設備。當命令狀態返回為已完成時，操作完成。要測試auto_dp_cfg命令的結果，請執行以下操作：

仍然使用VME命令實用程序，選擇on_line命令。打開DP Monitor程序（5136-PFB-32/Monitor Utilities/DP Monitor），并選擇用于auto_DP_cfg命令的卡。

英文產品詳細信息

To automatically configure the 5136-PFB-VME DP host:

1. Run the VME Network Configuration program (5136-PFB-32/Configuration Tools/PFB Network Configuration) and select the VME card to use from the Open card dialog box.

2. Set the radio address, baud rate, and check the radio options for * * *.

3. Click 'OK' to close the program

4. Run the VME command utility (5136-PFB-32/Configuration Tools/

VME command), and then select the VME card you used in steps 1 to 3 again.

5. Select auto from the drop-down menu_ dp_ Configure option, and then click Execute. Connect the SST ProfiBus card online and search for configurable DP slave devices. When the command status returns to completed, the operation is completed. To test auto_ dp_ Please perform the following actions for the results of the cfg command:

Still using the VME command utility, select on_ Line command. Open the DP Monitor program (5136-PFB-32/Monitor Utilities/DP Monitor) and select for auto_ DP_ The card for the cfg command.