一、概述Introduction
高效斗式提升機是TD和TH斗式提升機的改進版。根據市場需求,在保持原有優勢和性能的基礎上,推出新一代GTD和GTH高效斗式提升機。 并生產。 該設備有兩種料斗:深桶,一般適用于輸送干燥,松散,易丟,流動性好的物料,如水泥,煤炭,碎石,糧食等物料; zh淺桶,適用于流動性差,砂,煤,化工原料等略濕的物料。
High-efficiency bucket elevator is an improved version of the TD and TH bucket elevators.According to the market demand,based on the maintenance of the original advantages and advanced performance, the new generation of GTD and GTH high-efficiency bucket elevators have been introduced and produced. The equipment has two kinds of hoppers: sh deep bucket, generally suitable for conveying dry, loose, easy to throw, good fluidity materials, such as cement, coal, gravel, grain and other materials; zh shallow bucket, it is suitable for Poor fluidity, slightly wet materials such as sand, coal, chemical raw materials, etc.
二、應用范圍Applied field
GTD和GTH型高效斗式提升機具有產量高,高度高,運行平穩,使用壽命長的特點??蓮V泛應用于建材,化工,煤炭,電力,港口運輸等物資運輸系統。
GTD and GTH high-efficiency bucket elevators feature high output, high height, stable operation and long service life. Can be widely used in building materials, chemicals, coal, electricity, port transportation and other material transportation systems.
三、技術參數Technical parameters
parameter table of high-efficiency bucket elevator is listed as two kinds: 配置不同的料斗,其輸送能力不同,故將高效斗式提升機技術參數表列為兩種:
(Sh type Bucket)Technical parameters TDG型斗提機(配用sh型料斗) 技術參數
Model | TDG160 | TDG200 | TDG250 | TDG315 | TDG400 | TDG500 | TDG630 |
輸送量capacity,m3/h | 32 | 45 | 72 | 101 | 158 | 220 | 348 |
料斗容量Bucket volume,L | 2.6 | 4.1 | 6.5 | 10 | 16 | 25 | 40 |
料斗間距bucket Spacing,mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 |
料斗運行速度bucket Speed,m/s | 1.2 | 1.2 | 1.34 | 1.34 | 1.5 | 1.5 | 1.5 |
提升高度Lifting Height,m | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
(Zh type Bucket)Technical parameters TDG型斗提機(配用zh型料斗) 技術參數
Model | TDG160 | TDG200 | TDG250 | TDG315 | TDG400 | TDG500 | TDG630 |
輸送量capacity,m3/h | 24 | 31 | 51 | 74 | 118 | 167 | 253 |
料斗容量Bucket volume,L | 1.9 | 2.9 | 4.5 | 7.4 | 12 | 19 | 29 |
料斗間距bucket Spacing,mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 |
料斗運行速度bucket Speed,m/s | 1.2 | 1.2 | 1.34 | 1.34 | 1.5 | 1.5 | 1.5 |
提升高度Lifting Height,m | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
Note: the capacity in the table is calculated by 75% filling rate. 注:表中輸送量按填充率75%計算