棒料，圓鋼加熱爐
中頻感應加熱設備的主要工藝參數和技術要求如下：
1.生產線名稱：KGPS350KW / 4.0KHZ中頻感應加熱設備
2.生產線數：3臺
3.設備用途：圓鋼，圓鋼加熱
4.中頻感應加熱設備主要工藝參數及技術要求：
4.1加熱工藝要求：
4.1.1圓鋼材質：加熱：Φ26×200mm，Φ45×105mm圓鋼，加熱溫度：1150℃，生產能力：700KG圓鋼
4.1.2圓鋼規格范圍：
| 圓形鋼規格（毫米） | 重量kg | 傳感器電爐型號 | 加熱時間s |
| 26×2 00 | 0.833 | GR30×1600 | 4 |
| 45×105 | 1.3 | GR45×1600 | 7 |
4.1.3加熱溫度：1150℃
4.1.4生產：每小時約700KG的較大圓鋼。
4.1.5正常運行時加熱穩定，各段之間的溫度波動在±20℃以內；圓鋼加熱后的溫差：軸向≤±20℃;徑向（核心工作臺）≤±20℃
4.1.6額定溫度中頻功率因數大于0.90
4.1.7冷卻水供應系統的壓力大于0.25MPa（正常水壓大于0.1MPa），較高的溫度為60℃，相應的軟管壓力和接口也需要按安全標準進行調整。
Roundbar, round steelmedium frequency induction heating equipment
hemain process parameters and technical requirements of themedium frequency induction heating equipmentare as follows:
1.Production line name:KGPS350KW/4.0KHZmedium frequency induction heating equipment
2.Number of production lines:3sets
3.Equipment use: round bar, round steelheating
4.Main process parameters and technical requirements of medium frequency induction heating equipment:
4.1Heating process requirements:
4.1.1Round steelmaterial:heating:Φ26×200mm,Φ45×105mm round steel, heating temperature: 1150 ° C, production capacity: 700KG round steel
4.1.2Round steelspecification range:
| Roundsteel specifications(mm) | Weightkg | Sensor model | Heating times |
| 26×200 | 0.833 | GR30×1600 | 4 |
| 45×105 | 1.3 | GR45×1600 | 7 |
4.1.3Heating temperature:1150 ° C
4.1.4Production: Largerround steel ofabout700KGper hour.
4.1.5 heheating is stable during normal operation, the temperature fluctuation between each section is within±20 ℃; thetemperature differenceofround steelafter heating: axial≤±20 ℃; radial (core table)≤±20 ℃
4.1.6Rated intermediate frequency power factor isabove0.90
4.1.7 hecooling water supply system pressure is greater than0.25MPa(normal water pressure is greater than0.1MPa), thehigher temperature is60℃, and thecorresponding hose pressure and interface also need to be scaled up to safety standards.
/plus/view.php?aid=182
哪個廠家的質量好?生產廠家西格馬質量好，售后完善。
