橡膠制品滑動摩擦，磨損性能試驗機  功能：

    本廠生產的計算機控制塑料滑動摩擦試驗機是在現有電子塑料滑動摩擦試驗機的基礎上又增加了很多試驗功能，可以同時顯示扭矩-時間曲線，隨意設定試驗次數，顯示當前試驗次數，設定時間及當前試驗時間等多種功能，本機還配有彩色打印機，可以打印出帶有曲線，表格數據，試驗單位名頭的精美的試驗報告單。

Function:

The computer controlled plastic sliding friction test machine produced by our factory is on the basis of the existing electronic plastic sliding friction test machine, and has added a lot of test functions. It can display the torque time curve at the same time, set the test times at will, display the current test times, set the time and the current test time and other functions, this machine is this machine. It also has a color printer, which can print out exquisite test reports with curves, table data and test units.

橡膠制品滑動摩擦，磨損性能試驗機  特點：

1、速度精度：1%

2、負荷精度：0.5%

3、摩擦力矩精度：1%

4、具有試驗人員分級管理功能。

5、實時顯示摩擦系數-時間，扭矩-時間曲線。

6、試驗報告可打印試驗參數，試驗數據，曲線，備注等信息，簡單，方便，可編輯。

7、試樣尺寸： 30mm×7mm×6mm

8、轉動速度： 0-500轉/分 （可調）

9、負 荷： 196N ± 0.1%（可增至392N）

10、摩擦環尺寸：￠40×10mm ，倒角0.5×45°，外圓表面與內圓同心度偏差小于0.01

11、摩擦環材質：45號鋼,淬火,熱處理HRC40-45,外圓表面光潔度▼8

12、摩擦力矩： 0--4N·m

13、砝碼重量：4KG砝碼一件，1KG砝碼4件，可實現重量疊加功能。

14、計數器精度：1S

15、傳感器測量精度：1% FS

16、系統運行穩定，可靠性高。

17、結構緊湊，使用方便，簡單。

18、采用高精度電機、驅動機、傳感器，精度高。

19、主要配置及附件：（計算機控制）

1、試驗主機一臺

2、高精度扭矩傳感器一只

3、計算機數據采集卡一塊

4、計算機一臺（品牌）

5、彩色激光噴墨打印機一臺

6、計算機控制軟件一套

7、4Kg 砝碼兩件（備用一套）

8、標準磨擦環四件（備用兩件）

9、產品使用說明書一份

10、產品合格證

11、產品裝箱單一份

12、整機重量：約87 公斤

Features:

1. Speed accuracy: 1%

2. Load accuracy: 0.5%

3. Friction torque accuracy: 1%

4. It has the function of graded management of experimental personnel.

5. Real time display of friction coefficient time and torque time curves.

6. The test report can print information such as test parameters, test data, curves, notes, etc. It is simple, convenient, and editable.

7. Sample size: 30mm x 7mm x 6mm

8. Rotation speed: 0-500 rpm (adjustable)

9. Load: 196N ± 0.1% (can be increased to 392N)

10. Friction ring size: ￥ 40 x 10mm, chamfered at 0.5 x 45 °, with a concentricity deviation of less than 0.01 between the outer and inner surfaces

11. Friction ring material: 45 steel, quenched, heat treated HRC40-45, outer surface smoothness ▼ 8

12. Friction torque: 0-4N · m

13. Weight: One 4KG weight and four 1KG weights can achieve weight stacking function.

14. Counter accuracy: 1S

15. Sensor measurement accuracy: 1% FS

16. The system runs stably and has high reliability.

17. Compact structure, convenient to use, and simple.

18. Adopting high-precision motors, driving machines, and sensors, with high precision.

19. Main configuration and accessories: (computer control)

1. One test host

2. One high-precision torque sensor

3. One computer data acquisition card

4. One computer (brand)

5. One color laser inkjet printer

6. A set of computer control software

7. Two 4Kg weights (one spare set)

8. Four standard friction rings (two spare)

9. One copy of the product user manual

10. Product Qualification Certificate

11. Product packing list copy

12. Overall weight: approximately 87 kilograms

精度Precision:

1、速度精度：1%

2、負荷精度：0.5%

3、摩擦力矩精度：1%

4、計數器精度：1S

5、傳感器測量精度：1% FS

Precision:

1. Speed precision: 1%

2. Load precision: 0.5%

3. The precision of friction moment: 1%

4. Counter precision: 1S

5. Sensor measurement accuracy: 1% FS

技術參數：  M-200

1、試樣尺寸： 30mm×7mm×6mm；

2、轉動速度： ≤200 轉/分（可調）；

3、負荷： (20KG)196N ± 0.1%,可增至(40KG)392N；

4、摩擦環尺寸：≥￠40×10mm ，倒角≥0.5×45°，外圓表面與內圓同心度偏差≤0.01；

5、摩擦環材質：45 號鋼；

6、摩擦力矩： 0—4N.m；

7、砝碼重量：4KG 砝碼十件，1KG 砝碼十件，可實現重量疊加功能；

8、精度：速度精度≤1%；負荷精度≤0.5%；摩擦力矩精度≤1%；計數器精度≤1S；傳感器測量精度≤1%F。

9、配件：

試驗主機一臺；

高精度扭矩傳感器一只；

計算機數據采集卡一塊；

計算機控制系統一套；

標準摩擦環二件；

使用說明書一份；

產品合格證一份；

產品裝箱單一份。

Technical parameters: M-200

1, sample size: 30mm x 7mm x 6mm;

2, rotation speed: less than 200 turn / points (adjustable);

3, load: (20KG) 196N + 0.1%, which can be increased to (40KG) 392N;

4, the size of the friction ring is greater than or equal to 40 x 10mm, the chamfering is equal to 0.5 x 45 degrees, and the concentricity deviation between the outer surface and the inner circle is less than 0.01.

5, friction ring material: No. 45 steel;

6, friction torque: 0 - 4N.m;

7, weight weight: 4KG weight ten, 1KG weight ten, can achieve weight superposition function.

8, accuracy: speed accuracy is less than 1%; load accuracy is less than 0.5%; friction torque accuracy is less than 1%; counter accuracy is less than 1S; sensor measurement accuracy is less than 1%F.

9, parts:

Test host one;

High precision torque sensor one;

A piece of computer data acquisition card;

A set of computer control systems;

Two standard friction rings;

One copy of the instructions;

A copy of the product certificate;

A single copy of the packing of the products.

符合標準：

GB/T 3960-1983 塑料滑動摩擦磨損試驗方法 GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法

Conform to the standard:

GB/T 3960-1983 plastic sliding friction and wear test method GB/T 9141.8-1999 flexible graphite sheet friction coefficient test method

試驗步驟

1、圓環應清除油污，貯存于干燥缸內以防生銹。

2、試樣經狀態調節后用感量為0.1毫克的分析天平稱取其質量（M1）。

3、把試樣裝進夾具，摩擦面用角尺校正并使它與圓環的交線外于試樣正中。裝好摩擦力矩記錄紙，開機校好零點。

4、再次用乙醇、丙酮等不與塑料起作用的溶劑仔細清除試樣和圓環上的油污，此后不準再用手接觸試樣和圓環的表面。

5、平穩地加荷至選定的負荷值。

6、對磨2小時后停機卸負荷，取下試樣和圓環，清理試樣表面后，用精度不低于0.02毫米的量具測量磨痕寬度，或在試驗環境下存放1小時后稱取試樣質量（m2)。

7、讀取摩擦力矩值。

Test steps

1. The circular ring should be cleaned of oil stains and stored in a drying cylinder to prevent rusting.

2. After adjusting the state of the sample, weigh its mass (M1) using an analytical balance with a sensitivity of 0.1 milligrams.

3. Insert the sample into the fixture, calibrate the friction surface with an angle ruler, and ensure that its intersection with the circular ring is outside the center of the sample. Install the friction torque recording paper and turn on the machine to calibrate the zero point.

4. Carefully remove the oil stains on the sample and ring using solvents such as ethanol and acetone that do not interact with the plastic. Afterwards, do not touch the surface of the sample and ring with your hands.

5. Load steadily to the selected load value.

6. After grinding for 2 hours, stop the machine to unload the load, remove the sample and ring, clean the surface of the sample, measure the width of the grinding mark with a measuring tool with an accuracy of no less than 0.02 millimeters, or weigh the sample mass (m2) after storing in the test environment for 1 hour.

7. Read the friction torque value.

設備維修服務：

我公司產品自用戶現場調試驗收合格后 1 年內免費保修，終身維護。在1 年免費保修期內產品發生非人為質量問題，我公司為客戶提供免費維修。如產品在免費保修期外出現故障，維修服務只適當收取材料成本費。

售后管理：我公司實現計算機化管理，實行客戶定期電話回訪制度，定期復查設備的工作情況，定期電話指導用戶對設備進行保養和檢測，以便設備正常運轉，跟蹤客戶的設備使用情況，以便及時對設備進行維護