FEATURES l Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard l QSFP+ MSA compliant l Compliant with QDR/DDR Infinibａnd data rate l Up to 11.2Gb/s data rate per wavelength l 4 CWDM lanes MUX/DEMUX design l Up to 40km transmission on single m

詳細介紹

FEATURES

lCompliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard

lQSFP+ MSA compliant

lCompliant with QDR/DDR Infinibａnd data rate

lUp to 11.2Gb/s data rate per wavelength

l4 CWDM lanes MUX/DEMUX design

lUp to 40km transmission on single mode fiber (SMF)

lOperating case temperature: 0 to 70 ℃

lMaximum power consumption 2.5W

lLC duplex connector

lRoHS compliant

APPLICATIONS

l40GBASE-ER4 Ethernet Links

lInfinibａnd QDR and DDR interconnects

lClient-side 40G Telecom connections

Mechanical Dimensions

Optical Characteristics

Parameter	Symbol	Min	Typical	Max	Units	Notes
Wavelength Assignment	L0	1264.5	1271	1277.5	nm
	L1	1284.5	1291	1297.5	nm
	L2	1304.5	1311	1317.5	nm
	L3	1324.5	1331	1337.5	nm
Transmitter
Side Mode Suppression Ratio	SMSR	30			dB
Total Average Launch Power	PT			10.5	dBm
Average Launch Power, each Lane	PAVG	-2.7		4.5	dBm
Optical Modulation Amplitude (OMA), each Lane	POMA	0.3		5	dBm	1
Difference in Launch Power between any Two Lanes (OMA)	Ptx,diff			4.7	dB
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane		-0.5			dBm
TDP, each Lane	TDP			2.6	dB
Extinction Ratio	ER	5.5			dB
Relative Intensity Noise	RIN			-128	dB/Hz	12dB reflection
Optical Return Loss Tolerance	TOL			20	dB
Transmitter Reflectance	RT			-12	dB
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.25,0.4,0.45,0.25,0.28,0.4}
Average Launch Power OFF Transmitter, each Lane	Poff			-30	dBm
Receiver
Damage Threshold, each Lane	THd	3.3			dBm	2
Total Average Receive Power				4.5	dBm
Average Receive Power, each Lane		-21.2		-4.5	dBm
Receiver Reflectance	RR			-26	dB
Receive Power (OMA), each Lane				-4	dBm
Receiver Sensitivity (OMA), each Lane	SEN			-19	dBm
Stressed Receiver Sensitivity (OMA), each Lane				-16.8	dBm	3
Difference in Receive Power between any Two Lanes (OMA)	Prx,diff			7.5	dB
LOS Assert	LOSA	TBD			dBm
LOS Deassert	LOSD			-23	dBm
LOS Hysteresis	LOSH	0.5			dB
Receiver Electrical 3 dB upper Cutoff Frequency, each Lane	Fc			12.3	GHz
Conditions of Stress Receiver Sensitivity Test (Note 4)
Vertical Eye Closure Penalty, each Lane			2.2		dB
Stressed Eye J2 Jitter, each Lane		Per OTL3.4, G.8251
Stressed Eye J9 Jitter, each Lane		Per OTL3.4, G.8251

Notes:
1. Even if the TDP < 0.8 dB, the OMA min must exceed the minimum value specified here.
2.Thereceivershallbe able to tolerate, without damage, continuous exposure to a modulated optical input signal having this power level on one lane. The receiver does not have to operate correctly at this input power.
3. Measured with conformance test signal at receiver input for BER = 1x10-12.

4. Vertical eye closure penalty and stressed eye jitter are test conditions for measuring stressed receiver sensitivity. They are not characteristics of the receiver.

其他推薦產品更多>>