通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
廣州市藍河電子設備有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地廣州市
聯系方式:胡樂樂查看聯系方式
更新時間:2022-05-07 12:54:44瀏覽次數:134次
聯系我時,請告知來自 智慧城市網DID-4數顯扭力起子Screwtighteningcontrol●DIGITALTORQUEDRIVER DID-4M(1)Unifythedisplaysectionaframe
DID-4數顯扭力起子
Screw tightening control |
● DIGITAL TORQUE DRIVER DID-4M |
![]() |
(1) Unify the display sectiona frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple |
*The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed *Available in: lb-in, kg-cmN-m *Peak, Real TimePeak Down measuring mode (selectable) *800 data memory. *Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter *Programmable Auto Zero function resets unit to zero for easy operation *Both CWCCW operation *ASCII format output(USB) *Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use * AC chargercarrying case included. |
Specification | DID-4 | |
Measuring range | 0.020 - 4 N-m | |
0.20~40 kgf-cm | ||
0.20~35 lbf-in | ||
Accuracy | ± 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | |
Display | The 4 figures digital display of LCD | |
The measurement direction | CW-CCW (rightleft) | |
Measuring mode | P-P Peak | Holding Peak Load Value |
T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | |
P-D Peak down | Holding Load Value at the moment to change from upward to downword | |
C Real-time output | Load torque value is outputted every about 1/ 160. | |
Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing |
The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |
Data spec. | Data transfer | ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed. |
Data memory | 800 data / ten channels data | |
A setup of the number of counts | One to 99 count (count in a direction with a bundle) | |
Power supply | Ni-Cd chargeable battery 1.2V×4cells 600mAh | |
Auto power save | 10 minutes no use, automatically switch off. | |
Charging time | From empty - less than 5hours | |
Continunous working time | 12 hours | |
Bit /Socket part | HEX6.35 | |
Weight | about 400g | |
Attachment | Bit (+) #1 #2 | |
Accessories (one piece each) | Dedicated AC/DC Adaptor (Charger),100~230VAC | |
An inspection report, a proofreading certificate, a traceability system figure |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
污水在線PH計- 發酵罐ph計儀器儀表-國產ph分析儀
PHG-2081S ¥500智慧城市網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
廣州市藍河電子設備有限公司