西門子G120C變頻器6SL3210-1KE23-8UF1

概述河南兆陽公司在經營活動中精益求精，具備如下業務優勢：
 SIEMENS 可編程控制器1、SIMATIC S7 系列PLC：S7-200、S7-1500、S7-1200、S7-1500、S7-300、S7-400、ET-200邏輯控制模塊 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
2、SITOP直流電源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并聯.3、 HMI  觸摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
      SIEMENS 交、直流傳動裝置
4、 交流變頻器 MICROMASTER系列：MM420、MM430、MM440、G110、G120.
MIDASTER系列：  MDV
5、全數字直流調速裝置 6RA23、6RA24、6RA28、6RA70、6SE70系列
       SIEMENS 數控 伺服電機
6、SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
      系統及伺服電機，力矩電機，直線電機，伺服驅動等備件銷售。
西門子PLC模塊    西門子變頻器    西門子觸摸屏  西門子電線電纜  西門子數控系統等
?

SINAMICS G120C, frame sizes FSAA to FSF, with Intelligent Operator Panel IOP?2

SINAMICS G120C compact converters offer a well-balanced combination of features to address a wide range of applications. They are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.

SINAMICS G120C converters are especially suitable when it comes to meeting the requirements of system integrators, OEMs and distributors regarding high productivity and tailored performance.

優勢

• Compact design
• Frame size FSAA allows easy DIN rail mounting
• Side-by-side design
• High power density, low envelope dimensions
• Simple installation in the tightest space
• Low space requirement
• Use in small control cabinets, close to the machine
• Optimized parameter set
• Optimized commissioning
• Compact Operating Instructions
• BOP?2 or IOP?2 Operator Panels can be used
• Integrated USB connection
• Simple and fast software parameter assignment
• Simple to use during commissioning and in operation
• Minimized training costs, existing SINAMICS know-how can be used
• High degree of service friendliness, simple maintenance
• Plug-in terminals
• Cloning function using BOP?2, IOP?2, or memory card
• Operating hours counter for "drive on" and "motor on"
• Fast mechanical installation
• Intuitive standard commissioning
• Component of Totally Integrated Automation
• Energy-efficient, sensorless vector control
• Automatic flux reduction with V/f ECO
• Integrated energy saving computer
• Safety Integrated (STO)
• Communication versions with PROFINET / EtherNet/IP, PROFIBUS DP, USS/Modbus RTU
• Wireless commissioning, operation and diagnostics via m0bile device or laptop thanks to the optional SINAMICS G120 Smart Access
• Connection to the Cloud MindSphere with the optionally available SINAMICS CONNECT 300 IoT Gateway
• Varnished modules
• Operation up to an ambient temperature of 60 °C

河南兆陽自動化科技有限公司銷售西門子千萬余產品 盡新老顧客您來詢價訂貨采購，歡迎您來兆陽公司，謝謝您的光臨！ 
連系人  ：邵經理
電   ：191+ 39 98+ 27 30        同微號
?

Extended warranty

For SINAMICS G120C, Siemens offers an extended warranty of up to 6½ years:

• 12-month standard warranty
• Optional extension via Service Protect
  • Free for the first 6 months after registering the product at:
  • Subject to a charge for a further 3 or 5 years

設計

SINAMICS G120C is a compact converter for control cabinet mounting in IP20 degree of protection where the Control Unit (CU) and Power Module (PM) function units are combined in one device.

The compact mechanical design and the high power density allow these devices to be installed in machine control enclosures and control cabinets for maximum space utilization. The SINAMICS G120C compact converter can be butt-mounted directly, without derating at temperatures up to 40 °C (104 °F).

SINAMICS G120C, frame size FSAA with BOP-2

SINAMICS G120C can be integrated into the widest range of applications, either using the integrated digital and analog inputs or via the integrated fieldbus interface (available in USS, Modbus RTU, PROFIBUS, PROFINET, EtherNet/IP versions). Especially the product versions with integrated PROFIBUS/PROFINET interface make full integration into the Siemens TIA family possible, therefore allowing the advantages of the seamless TIA product family to be fully utilized. SINAMICS G120C devices are preset in the factory so that they can be immediately connected to PROFIBUS or PROFINET fieldbus systems without parameterization.

Wireless commissioning, operation and diagnostics via m0bile device or laptop thanks to the optional web server module SINAMICS G120 Smart Access enabling user-friendly operation and easy access to the converter, even if this is installed in areas difficult to access.

With the optionally available SINAMICS CONNECT 300 IoT Gateway, connection to the Cloud MindSphere is possible.

SINAMICS G120C is also equipped with the safety function STO (Safe Torque Off) as standard, which is used to safely stop drives. As a consequence, machine manufacturers can simply comply with current machinery directives with minimum associated costs.

SINAMICS G120C can control asynchronous (induction) motors in the power range from 0.37 kW up to 132 kW (0.5 hp to 200 hp). Reliable and efficient motor operation is achieved by using state-of-the-art IGBT technology combined with vector control. The extensive range of functions integrated in the SINAMICS G120C also offers a high degree of protection for the converter and motor.

Line-side components

Line filter

SINAMICS G120C can be ordered with or without integrated Class A line filters. Optionally, an external Class B line filter can be used for classifying in a higher interference class.

Line reactors

Line reactors smooth the current drawn by the converter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC link capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the converter. A DC link reactor is integrated in frame sizes FSD to FSF, and therefore no line reactor is required.

Recommended line-side overcurrent protection devices

Overcurrent protection devices are absolutely necessary for the operation of the converters. The table listed in the section "Recommended line-side overcurrent protection devices" provides recommendations according to IEC and UL regulations, depending on the area of application. Recommendations on further overcurrent protection devices are available at: 

More information about the listed Siemens fuses is available in Catalog LV 10 as well as in the Industry Mall.

DC link components

Braking resistors

Excess energy in the DC link is dissipated in the braking resistor. The braking resistors are designed for use with the SINAMICS G120C. This has an integrated braking chopper (electronic switch). For the electromagnetically compatible connection of an optionally connectable braking resistor, the corresponding shield connection kit is to be ordered for frame sizes FSD to FSF.

Load-side power components

Output reactors

Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

Supplementary system components

IOP?2 Intelligent Operator Panel

Graphics-based, user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G120C.

BOP?2 Basic Operator Panel

A 2-line display to provide support when commissioning and troubleshooting the drive. The drive can be locally controlled.

Memory card

The parameter settings for a converter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the converter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again. The associated memory card holder is integrated in the converter.

SINAMICS G120 Smart Access

Wireless commissioning, operation and diagnostics via m0bile device or laptop thanks to the optional web server module SINAMICS G120 Smart Access enabling user-friendly operation and easy access to the converter, even if this is installed in areas difficult to access.

SINAMICS CONNECT 300 IoT Gateway

Connection to the Cloud MindSphere with the optionally available SINAMICS CONNECT 300 IoT Gateway.

PC converter connection kit 2

For controlling and commissioning a converter directly from a PC if the STARTER commissioning tool or SINAMICS Startdrive has been installed on the PC.

??

西門子G120C變頻器6SL3210-1KE23-8UF1?

Shield connection kits

A shield connection kit is included in the scope of delivery for frame sizes FSAA to FSC.
A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size for the frame sizes FSD to FSF. For the electromagnetically compatible connection of an optionally connectable braking resistor, the corresponding shield connection kit is to be ordered for frame sizes FSD to FSF.

Spare parts

Shield connection kits

A shield connection kit is supplied as standard with frame sizes FSAA to FSC. These shield connection kits can also be ordered as spare parts.
A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size for the frame sizes FSD to FSF. For the electromagnetically compatible connection of an optionally connectable braking resistor, the corresponding shield connection kit is to be ordered for frame sizes FSD to FSF.

Spare parts kit

This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.

Set of connectors

A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C converter.

Roof-mounted fan

A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

Fan unit

A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

集成

Connection example for SINAMICS G120C

USS/Modbus RTU communication interface

PROFIBUS DP communication interface

?