通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
上海凡而閥門有限公司
進口單級單吸離心泵美國直聯式離心泵
進口單級單吸離心泵參數:
流量:2-1080m3/h
揚程:5-150m
口徑:進口直徑:50-300mm
出口直徑:32-250mm
轉速:2900r/min和1450r/min或1480r/min兩級
功率:1.5-160kw
效率:24-88%
材質:鑄鐵、不銹鋼
電壓:380V、480V、415V、660V
頻率:50Hz、60Hz
Z高轉速:350
進口單級單吸離心泵美國直聯式離心泵
進口單級單吸離心泵參數:
流量:2-1080m3/h
揚程:5-150m
口徑:進口直徑:50-300mm
出口直徑:32-250mm
轉速:2900r/min和1450r/min或1480r/min兩級
功率:1.5-160kw
效率:24-88%
材質:鑄鐵、不銹鋼
電壓:380V、480V、415V、660V
頻率:50Hz、60Hz
zui高轉速:3500r/min(用于60HZ電源時,葉輪直徑有所減小)
zui高使用溫度:105℃
軸封:填料密封或機械密封
zui低使用溫度:-10℃
zui大工作壓力:一般為1MPa,如承壓件規定用球墨鑄鐵或鑄鋼制造,可達1.6MPa,請在訂貨時說明
進口單級單吸離心泵結構特點介紹:
進口單級單吸離心泵的基本結構差不多主要是由泵與電機和底座三大部分構成,其中泵
主要是由泵體、葉輪、軸、密封件、懸架、泵蓋、軸承體等幾部分組成。其中葉輪、軸、軸套
等組成了泵的轉子部件。在安裝使用時候注意一些細小的環節,如不能讓其他物質從泵的進出
水口進入泵體內,注意泵與電機的同心、填料密封的安裝、緊固螺栓的擰緊程度等,注意各個
細節,保證臥式離心泵的運行效率。
該系列的單級單吸離心泵除IS型的泵是采用的填料密封之外,其余的軸封方式都是采用的機械
密封。
進口單級單吸離心泵,美國進口單級單吸離心泵品牌(美國泰樂)適用范圍:
泵的零件用不銹鋼板壓制,經激光焊接而成,并有多種牌號的不銹鋼可供選用,因而泵的用途十分廣泛,主要適用于輸送各種潔凈水及輕腐蝕液體,可用于 住宅供水及增壓 工業鍋爐給水空調系統循環體會水 水處理和反滲透系統 食品工業、醫藥工業用水。
美國泰樂TYLER進口單級單吸離心泵售后服務:
用戶*,信譽*,優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證,我公司服務質量管理體系的宗旨是:建立并不斷完善科學、合理、高效的服務質量管理體系,公正、準確、及時地完成客戶的售后服務質量保障工作,為我公司的客戶服務建立良好、全面、充分的服務體系。
Imported single stage single suction centrifugal pump United States imported straight centrifugal pump
Single stage single suction centrifugal pump:
Flow: 2-1080m3/h
Lift: 5-150m
Caliber: inlet diameter: 50-300mm
Outlet diameter: 32-250mm
Speed: 2900r/min and 1450r/min or 1480r/min level two
Power: 1.5-160kw
Efficiency: 24-88%
Material: cast iron, stainless steel
Voltage: 380V, 480V, 415V, 660V
Frequency: 50Hz, 60Hz
Maximum speed: 3500r/min (for 60HZ power supply, the impeller diameter decreased)
Maximum operating temperature: 105
Packing: packing seal or mechanical seal
Minimum operating temperature: -10
Maximum working pressure: generally 1MPa, such as the provisions of the pressure bearing ductile cast iron or cast steel manufacturing, up to 1.6MPa, please specify when ordering
Introduction to the structure characteristics of imported single stage single suction centrifugal pump:
The basic structure of the centrifugal pump is mainly composed of three parts, the pump and the motor and the base
Mainly by the pump body, impeller, shaft, seals, suspension, pump cover, bearing body, etc.. The impeller, shaft, shaft sleeve
The rotor component of the pump is formed. In the installation and use of attention to some small links, such as can not let other substances from the pump in and out
Nozzle into the pump body, pay attention to the pump and the heart of the motor, the installation of packing seal, tighten the degree of tightening bolts, etc.
Details to ensure the operation efficiency of horizontal centrifugal pump.
Pump single stage single suction centrifugal pump in the IS type of the series is the use of the packing seal, seal the way the rest are used in machinery
Seal up。
The import of single-stage single suction centrifugal pump, the United States imported single-stage single suction centrifugal pump brands (American scope Taylor):
Stainless steel plate pressing pump parts, laser welding, and a variety of grades of stainless steel can be used, so the pump is widely used, mainly for conveying a variety of corrosive liquid light and clean water, can be used for residential water supply and booster industrial boiler air conditioning system of circulating water treatment and reverse osmosis the system food industry, pharmaceutical industrial water.
The United States imports of tylosin TYLER single stage single suction centrifugal pump with customer service service:
Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.
客戶須知:
詢問美國泰樂TYLER電磁閥一級代理商。銷售一部(上海凡而閥門有限公司),參數提供如下:
1.公稱通徑2、公稱壓力3、流體性質(包括溫度、介質) 4.材質 5.連接方式 6電源.電壓7、控制方式(常開式、常閉式、自保持式).8、防護形式(防爆型、防水型、防塵型、防潮型、防腐型、普通型)
美國泰樂相關領域業績:杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線,南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。
帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。
美國泰樂代理商上海凡而閥門有限公司,咨詢:
Customer information:
Welcome to inquire us Taylor TYLER solenoid valve agents. Sales of a (Shanghai and valve Co., Ltd.), the parameters are provided as follows:
1 nominal diameter, nominal pressure 3, 2 fluid properties (including temperature, medium) 5 connection 4 material 6 power. 7, voltage control mode (normally open and normally closed, self retaining.8), protection (explosion-proof, waterproof, dustproof, moistureproof and anticorrosive type type type, ordinary type)
The United States Taylor related field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.
Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.
The United States and Shanghai where agents Taylor Valve Co. Ltd., consulting:
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智慧城市網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份