通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
深圳市德威達科技有限公司
適用于液體或氣體
產品名稱: OP系列標準孔板流量計
產品型號: OP系列
適用于液體或氣體
產品介紹
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2" to 24" and can be used with compatible liquids and gases.
技術參數
介質: Clean air and compatible gases.
材質: 304 SS, Buna-N gaskets.
精度: ±0.6% full scale flow. (Beta= .2-.6) ±0.7% for Beta greater than .6.
溫度: 140°F (60°C) max.
壓力: 150 psi max.
壓損: 1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51% of the d.p.
尺寸: 1/2" to 24".
連接: 1/4" female NPT.
安裝: Standard flange 125#/150# rating.
管路: General requirements 10 diameter upstream and 5 diameter downstream.
重量: Varies with line size. See Catalog page.
選型:
1/2" 到24",請咨詢我司。
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商鋪:http://cchxqp518.com/st16986/
主營產品:Dwyer儀器儀表,公司代理品牌有 美國 DWYER、ANDERSON、MERCOID、ITT、德國BECK、新加坡TELASIA等,產品涉及壓力、流量、液位物位、風速、溫濕度、閥門、氣體檢測、燃燒、數據采集等,廣泛應用于工業自動化、暖通空調、樓宇自控、電廠、石油、化工、水處理,鍋爐、壓縮機、冷凍制冷設備、食品、醫藥、紡織、造紙、電子、環保、潔凈工程等領域。
智慧城市網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份