DURAG公司是一家成立于1948年專業的粉塵儀生產廠商，主營燃燒技術(點火器)、環境監測、熱成像技術、隧道傳感器在有非常高的度。

【德國公司直接采購】
垂詢洽談：
深圳市扎克貿易有限公司
：王文強
手機:

：

：
：www.zacsz。。ｃｏｍ
地址：中國深圳市深南中路2038號愛華大廈607

D-HG 400
 
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid 

fuels in industrial burners of any capacity.
Read more …
D-HG 55
 
The D-HG 55 electronic ignition transformer is suitable for the ignition of gases and 

liquid fuels in small burners.
Read more …
D-ZL ...
 
Connection to ignition devices for the ignition of gas or liquid fuels in industrial 

burners of any capacity.
Read more …
D-VE 500
 
Pneumatic retraction unit for the insertion and retraction of ignition lances and ignition 

devices.
Read more …
SMITSVONK Ignition Systems
 
For more than half a century Smitsvonk has been making low-tension high-energy ignition and 

control systems for industrial combustion processes.
Read more …
Ignition Lances for Flares
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Ignition Lances for Burners and Processes
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
E-LIGHT Ignition Units
 
Ignition and burner control for ignition burner, pilots burners, lances and spark plugs.
Read more …
E-SPARK 3/6
 
12 joule ignition unit
Read more …
BWO Ignition Units
 
Ignition and burner control for ignition burner, pilots burners, lances and spark plugs.
Read more …
SVECU Ignition Units
 
Ignition and control unit for[ pilots burners and lances for flares.
Read more …
Portable Ignition Units
 
Lightweight, battery operated ignition unit.
Read more …
Semi Portable Ignition Units
 
Explosion proof ignition unit with ignition lance to ignite main burner in furnaces or 

boilers. Ignition can be controlled by a remote switch.
Read more …
Ignition Units
 
Ignition of main burners at places where a fixed pilot burner or igniter is not available 

and a spark is insufficient to ignite the main burner.
Read more …
Pneumatic Retraction unit
 
Ignition of main burners at places where a fixed pilot burner or igniter is not available 

and a spark is insufficient to ignite the main burner.
HEGWEIN Gas Fired Igniters
Compact design with integrated spark transformer and ionisation flame monitor/burner 

control
Built-in flame rod, ideally located
No high-voltage cable required on site
Guaranteed electromagnetic compatibility
Rugged, low-maintenance design
Sizes ranging from 2 kW to 10 MW (7,000 BTU/hr to 35,000,000 BTU/hr)
Custom outer tube lengths available in 10-mm increments
Fuel types include natural gas, conditioned coke oven gas, propane/butane or process gas, 

according to customer preference and analysis
Extremely tight and long pilot flame - no automatic retraction system typically required
Class 1, 2 or 3 gas fired igniters according to NFPA also available
Also available with flexible outer tube for tilting burners
Approvals / Certificates
Overview
Read more …
2 kW Gas Fired Igniters
 
Read more …
4 kW Gas Fired Igniters
 
Read more …
45 kW Gas Fired Igniters
 
Read more …
120 kW Gas Fired Igniters
 
Read more …
250 kW Gas Fired Igniters
 
Read more …
600 kW Gas Fired Igniters
 
Read more …
1000 kW Gas Fired Igniters
 
Read more …
2000 kW Gas Fired Igniters
 
Read more …
2/4 kW Gas Fired Igniters, Zone 1/21
 
Gas Fired Igniters for Hazardous Areas, Zone 1 or Zone 21
Read more …
45/120/250/600 kW Gas Fired Igniters, Zone 1/21
 
Gas Fired Igniters for Hazardous Areas, Zone 1 or Zone 21
Read more …
2/4 kW Gas Fired Igniters, Zone 2/22
 
Gas Fired Igniters for Hazardous Areas, Zone 2 or Zone 22
Read more …
45/120 kW Gas Fired Igniters, Zone 2/22
 
Gas Fired Igniters for Hazardous Areas, Zone 2 or Zone 22
Read more …
250 kW Gas Fired Igniters, Zone 2/22
 
Gas Fired Igniters for Hazardous Areas, Zone 2 or Zone 22
Read more …
600 kW Gas Fired Igniters, Zone 2/22
 
Gas Fired Igniters for Hazardous Areas, Zone 2 or Zone 22
Read more …
45/120/250 kW Gas Fired Igniters, flexible
 
Gas Fired Igniters with Flexible Outer Tube
Read more …
300 kW Gas Fired Igniters, NFPA
 
Read more …
1000 kW Gas Fired Igniters, NFPA
 
Read more …
6000 kW Gas Fired Igniters, NFPA
 
Read more …
10000 kW Gas Fired Igniters, NFPA
6 - 40 MW Warm Up Gun

Gas Fired Igniters Tube ?48.3 mm explosionproof
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Gas Fired Igniters Tube ?48.3 mm
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Gas Fired Igniters Tube ?54 mm explosionproof
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Gas Fired Igniters Tube ?54 mm
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Gas Fired Igniters Tube ?38 mm explosionproof
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Gas Fired Igniters Tube ?38 mm
 
Ignition of main burners in furnaces, boilers, power plants and incinerators.
Read more …
Flame Front Generators
 
Flaring systems in a refinery, petrochemical plant or steel plant ensure the safe and 

efficient disposal of relieved gases.
Read more …
Flare Pilot Burners (electrical ignited)
 
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares.
Read more …
Flare Pilot Burners (flame front ignition)
 
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares.
Read more …
1000/400 kW Dual Fuel Igniters
 
Dual Fuel Igniters for Extra Light Fuel Oil (Diesel) or Gas
Read more …
1000/1000 kW Dual Fuel Igniters
 
Dual Fuel Igniters for Extra Light Fuel Oil (Diesel) or Gas
Read more …
D-GF 150
 
Self-monitoring and fail-safe burner control for the control of gas and oil burners as well 

as combined gas/oil burners of any capacity.
Read more …
D-GF 150-MB
 
Self-monitoring and fail-safe burner control for the control of gas and oil burners as well 

as combined gas/oil burners of any capacity.
Read more …
D-AM 150
 
Extension module for the D-GF 150 automatic firing device with functions ranging from first 

out annunciator to plain text display up to fieldbus communication.
Read more …
D-GF 75 / ASD-75
 
Self-monitoring and fail-safe burner controls for the control of gas and oil burners as 

well as combined gas/oil burners of any capacity.
Read more …
Z 726 K...
 
Self-monitoring and fail-safe burner control for the integration into the Hegwein burners 

and igniters.
Read more …
D-LE 603
 
Flame sensor (flame scanner) for the monitoring of gas, oil and coal flames, primarily in 

multi-burner view applications.
Read more …
D-LE 703
 
Flame sensor (flame scanner) for use with fibre-optic system
Read more …
D-LE 701
 
Flame sensor (flame scanner) for use with fibre-optic system
Read more …
D-LL 7xx
 
Fibre-optic systems for DURAG flame sensors and flame monitors
Read more …
D-GT 800
 
Flame sensor (flame scanner) for the monitoring of gas and oil flames, primarily in 

gasturbines or in particularly harsh environments
Read more …
D-LE 103
 
Flame sensor (flame scanner) for the monitoring of gas, oil and coal flames, primarily in 

single burner view applications.
Read more …
D-LX 200
 
Self-monitoring and fail-safe compact flame monitor for the monitoring of gas, oil, and 

coal flames with integrated UV or IR flame sensor.
Read more …
D-LX 720
 
Compact flame monitor with fibre optic system
Read more …
D-LX 100
 
Self-monitoring and fail-safe compact flame monitor for the monitoring of gas, oil and coal 

flames with integrated UV, VIS or IR flame sensor, primarily in single burner view 

applications.
Read more …
D-LX 700
 
Compact flame monitor with fibre optic system
Read more …
D-UG 120
 
Self-monitoring and fail-safe control unit for the monitoring of gas, oil and coal flames 

with DURAG UV, UV+IR or IR flame sensors, primarily in single burner furnaces.
Read more …
D-UG 660
 
Self-monitoring and fail-safe control unit for the monitoring of gas, oil and coal flames 

with DURAG UV, UV+IR or IR- flame sensors, primarily in multiple-burner furnaces.
Read more …
A 240 K3
 
Control unit for intermittent or continuous operation, with volt-free relay contact for 

integration into the main burner management system.
Read more …
A 285 K 2.3
 
This flame relay is a piece of equipment that needs to be integrated into a higher ranking 

burner control system. It must be only be operated with a Hegwein flame monitor.
Read more …
AAL 75
 
Particularly cost-effective, fail-safe flame monitors for the monitoring of gas and oil 

burners as well as gas and oil fired igniters.
Read more …
AAC 75
 
Particularly cost-effective, fail-safe flame monitor with flame signal converter for the 

monitoring of gas and oil burners as well as gas and oil fired igniters.
Read more …
Valve Proving Systems AD 2 H...
Pressure Switches FD...
tl_files/dg/images/logos/hegwein_150.gif
This pressure switch is a piece of equipment that needs to be integrated into an 
overriding control system. The pressure switch picks up a pressure and gives 
out a signal.
Safety Shut-Off Valves SMU...
tl_files/dg/images/logos/hegwein_150.gif
This safety shut-off valve is a piece of equipment that needs to be integrated 
into an overriding control system.
D-VTA 200 for the power industry
Video-based modular system for monitoring industrial high temperature processes
Read more …
D-VTA 200 for the cement industry
Video-based thermography for cement plants
Read more …
D-VTA 200-
Transportable System for inspection and thermal analyses in combustion chambers
Read more …
D-R 220
 
Optical transmission analyser to monitor the opacity or dust concentration in combustion 

and filter systems, ducts and warehouses.
Read more …
D-R 290 2nd generation
 
New generation optical opacity / dust monitor to measure the opacity or dust concentration 

of sample gas. Type approved and certified.
Read more …
D-R 290
 
Certified optical transmission monitor to measure the opacity or dust concentration of 

sample gas.
Read more …
D-R 320
 
The new generation scattered light dust monitor to detect lowest to medium dust 

concentrations in dry flue and process gas.
Read more …
D-R 300
 
Certified scattered light dust monitor to detect smoke spot number in dry flue gas
Read more …
D-RX 250
 
Certified dust monitor, combined with a flow, temperature and absolute pressure measurement 

for monitoring of small to medium dust concentrations in dry flue gas and process gas
Read more …
D-R 800
 
Certified scattered light dust monitor to detect low to medium concentrations of dust in 

dry flue gas and process gas.
Read more …
D-R 820F
 
Extractive dust monitor for wet sample gas to monitor low to medium dust concentrations
Read more …
F-904-20
 
Dust measuring analyser especially for wet stack gases and for blast furnace gas (BFG) 

monitoring.
Read more …
D-ISC 100 Universal Operating Unit
 
Universal display and operating unit suitable for all new generation DURAG measuring 

systems.
Read more …
D-RC 120
 
Automatic sampling device for gravimetric dust measurements
Read more …
D-FW 231
 
Filter monitor to detect the efficiency and function of filters and filtration systems.Dust 

Monitor for qualitative measurement of dust concentration in dry process or flue gas.
Read more …
D-FW 240 EX
 
Filter monitor to detect the efficiency and function of filters and filtration systems.Dust 

Monitor for qualitative measurement of dust concentration in the dry process or flue gas.
Read more …
D-FW 230 B
 
Display, evaluation- and supply unit for D-FW 231 and D-FW 240Ex
Read more …
F-701-20 Ambient air particulate monitor
 
Ambient air particulate monitor to detect TSP, PM 10 or PM 2.5 in ambient air, for use in 

industrial or governmental ambient air monitoring networks.
D-FL 100
 
Suitability-tested and certified impact pressure system to measure velocity and volume flow 

of dry flue gas or process gas in pipes or ducts.
Read more …
D-FL 220
 
Ultrasonic sensor system to measure the velocity and the volume flow of flue gas, air or 

process gas in pipes or ducts.
Read more …
D-ISC 100 Universal Operating Unit
 
Universal display and operating unit suitable for all new generation DURAG measuring 

systems.
Read more … 
HM-1400 TRX Total mercury analyzer
Extractive Automatic Measuring System (AMS) for continuous total mercury monitoring (CMM) 

in stack gas or process gas
hm1400trx 01 800x600 hm1400trx 02 800x600
analyser using extractive measuring principle
analyser does not require failsafe instrument air
conversion of Hgx to Hg0 inside a thermal reactor, separated from the photometer
detection of Hg0 by help of a dual beam UV CVAAS photometer
no extremely heated optical components
simple operation by keypad-display
simple maintenance, simple exchange of components
test gas generator as an option
many installed units in Europe
more than 20J experience in Hg monitoring
D-FL 100
 
Suitability-tested and certified impact pressure system to measure velocity and volume flow 

of dry flue gas or process gas in pipes or ducts.
Read more …
D-FL 220
 
Ultrasonic sensor system to measure the velocity and the volume flow of flue gas, air or 

process gas in pipes or ducts.
Read more …
D-ISC 100 Universal Operating Unit
 
Universal display and operating unit suitable for all new generation DURAG measuring 

systems.
Read more …
D-EMS 2000 Standard
 
D-EMS 2000 Standard
Read more …
D-EMS 2000 Economy
 
D-EMS 2000 Economy
Read more …
D-EMS 2000 Compact
 
D-EMS 2000 Compact
Read more …
D-DAS 2010
 
MCERTS certified
Read more …
D-DAS 2000
 
w/o certifications
Read more …
Extract of module list
(For complete list see "Module overview" below.)
D-CDM
 
Acquisition of emission reduction data at CDM/JI-projects
Read more …
D-PM.WWW
 
HTML-based presentation module for the network
Read more …
D-QAL
 
AMS documentation, collection and evaluation in accordance with EN 14181 (QAL3)
Read more …
D-EFü.WWW
 
Automatic transfer of data to a server in the Intranet / Internet
Read more …
D-CO2
 
Collection, analysis, reporting and visualization of current and historical CO2 emissions
Read more …
D-Cloud
 
Storage and visualization of data in the cloud
Read more …
D-EMS 2000 Compact Network System
 
D-EMS 2000 Compact Network System
Read more …
D-EMS 2000 Standard Network System
 
D-EMS 2000 Standard Network System
Read more …
CDM/JI - Project Management
 
CDM/JI - Project Management
Read more …
Cooling Water Monitoring
 
Cooling Water Monitoring
Read more …
Large Combustion Plants according to 2001/80/EC
 
Large Combustion Plants according to 2001/80/EC LCPD
Read more …
Waste Incinerators according to 200/76/EC
 
Waste Incinerators according to 200/76/EC WID
Read more …
Webhosting D-EFü.www
 
Webhosting D-EFü.www
Read more …
Maintenance Contracts
 
Maintenance Contracts
Read more …
Support Contracts for Partner
 
Support Contracts for Partner
Read more …
Support Contracts for Customer
 
Support Contracts for Customer
Read more …
On Call Service Contract
 
On Call Service Contract
Read more …
D-R 220T Visibility monitor
Visibility Monitor for road tunnels using optical transmission principle.
Sensor for ventilation control system or fire alarm system. Reliable measurement parallel 

to the tunnel axis.
D-R 220T>
measurement parallel to tunnel axis, continuous measurement
measurement along a distance of 10m, no spot measurement
corrosion resistant against tunnel atmosphere
determination and correction of the pollution of optical surfaces
measuring head and reflector can be exchanged quickly N
- no tools required
- no re-alignment required
signal transfer 
- per analog signal and relay outputs
- per RS485 Modbus RTU
hermetically sealed housing - no gas diffusion to optics or electronics
dust protection tube prevents contamination of the optics
long maintenance intervals
quick and easy startup with or without PC
D-FL 220T Ultrasonic flow velocity monitor
Measuring system for continuous evaluation of flow velocity and flow direction in tunnels.
Ultrasonic sensors for tunnel ventilation control system. Reliable measurement across the 

tunnel profile.
Two identical sensors alternay transmit and receive ultrasonic pulses. The system 

evaluates the transition times dependant on direction and calculates flow speed. D-FL 220T 

requires extremely low maintenance.
 
<p>D-FL 220T</p>
D-FL 220T
stand-alone system, no control unit required
simple configuration
corrosion resistant against aggressive tunnel atmosphere
sensors can be replaced quickly, no tools, no re-alignment required
signal transmission
- per 4-20mA analog signal and 2 relays
- per RS 485 bus via MODBUS RTU protocol
minimized spare requirements
extremely low maintenance